Don’t have trees in yourbackyard but want to hang string lights?
String lights are an excellentway to add ambiance for entertaining and gentle lighting for safe navigation ofyour backyard space.
Thankfully, there are many waysto hang strings lights when your backyard is treeless.
Stick around to learn the bestways to hang string lights from other objects and the pros and cons of eachmethod. Once you find the method that suits your needs, you can enjoy thesparkle string lights bring!
TABLE OF CONTENTS
FromPosts And Poles
Hanging string lights fromposts or poles is a quick way to provide temporary or permanent support.
Temporary solutions
Pros
- You can place them exactly where you need them
- It takes only seconds to install and remove
- You can spray-paint the buckets to fit any colorscheme
Cons
- Need to store them when not in use
- Costs add up if you need to string a large area
When you want string lighting for occasional backyard gatherings, short or long metal hooks are the simple solution and my go-to way to hang lights in my treeless backyard.
These poles slip into theground and feature a hook at the top hold the lights.
Another temporary solution isto stand, center, and level an eight-foot pole or wood post inside a bucket youfill with cement. You can also use shorter poles if you wish to delineate or“rope off” and area.
After the cement hardens, thepole will not lean, and the bottom-heavy weight prevents it from tipping over.3-inch PVC and wood 2x4s make cost-effective pole material.
Drill a large center hole torun the string lights through before stretching the line to the next pole. Youcan also use cup hooks, or a zip tie to hold the string in place.
To balance the weight of the pole and lights and prevent tip-overs, use at minimum a 2-gallon bucket for short (under four feet) posts and five-gallon bucket for tall posts.
Permanent solutions
Pros
- Poles won’t budge
- Lights (even heavy ones) can hang all year securely
- You can place poles in optimal locations
Cons
- Can’t move the pole
- Supplies are costly
- Digging and cement work takes effort
If you plan to display stringslights all the time, consider a permanent installation of a pole or post.
Follow these steps:
- Mark off the spots you want the posts. Space poles eight to ten feet apart for better support of the string lights.
- Verify there are no water, cable, or electrical lines buried in that location.
- Use a post-hole digger to remove dirt to below the frost line (typically two-feet-deep for warm climates and four-feet-deep for climates that freeze.)
- Place and center the pole in the hole. Make sure the pole is long enough to extend seven or eight feet above the ground.
- Pour cement into the hole.
- Use braces to hold the pole upright and level as the cement hardens.
- Attach a hook or drill a hole at the top of the pole to attach the string lights.
If you plan to use commercial-grade string lights, permanent installation is best.
Why? The sturdiness of theseposts allows you to add a thick support wire along your string light’s path.Use zip ties to hold the heavier string lights to this wire to reduce saggingand blowing in the wind.
Related | How To Hang A Swing
AlongFencing
Pros
- Quick and easy installation
- Placement prevents interference from people or pets
- Inexpensive
Cons
- Lights may be too far from the area you want tohighlight
- May have to put holes into the fencing
Draping string lights alongfencing is super quick and requires few fasteners to keep the lights in place.
For the exact placement of lights, use clip-hooks along the fence top. If you have a thin wood-slat fence, consider S-hooks that slip over the fence top with the bottom half of the hook holding the string lights.
If you use rope-style string lights, install screw-in plastic clips that the lights snap into to hold them in place.
AlongThe House
Pros
- Lights remain up and out of the way
- Supplies are inexpensive
- Can be left up all year
Cons
- Need a ladder to install attachments and hang thelights
- Position of house/shed/garage may not be ideal
Hanging string lights along thehouse keep them out of the way and provide a pleasant overhead illumination.
Use clips that slip onto gutters, or nail in rubber-coated hooks every four to six feet into a wood surface to hold the string lights securely in place.
If you have buildings situatedacross from each other, place strong hooks along both eaves, and stretch stringlights back and forth between the buildings. This pattern creates a“party” feel and also provides even light to the area below.
Hanging lights from buildingeaves require the use of a tall ladder. Use all ladder safety precautions, being especially careful when working anywherenear overhead power lines.
BetweenBushes
Pros
- Simple installation
- Free or low-cost hanging supplies
- Creates a nice ambiance
Cons
- Bushes need to be close enough to keep the lightsfrom looking sloppy
- Easier for kids or pets to tangle in the lights
If bushes in your backyard arewithin six or eight feet of each other, you can stretch or drape string lightsbetween them.
Use twist or zip ties to attachthe string lights to a sturdy branch within each bush.
I like the “natural”feel of hanging string lights in bushes since the foliage creates interestingshadows. The height of the lights in bushes is lower, which forms an excellentperimeter.
Keep in mind that over time,string lights left in bushes may incur damage from birds, squirrels, and othervisitors that like to chew.
Power Source For String Lights
Placing string lights aroundyour backyard requires a power source.
Locate the nearest electricaloutlet to start your string light path, or use extension cords to bring powerto the location you need. Be mindful that extension cords create a trip hazard,especially at night.
I am in love with solar string lights, which eliminates problematic cords while saving on your electric bill.
Hang the solar string as youlike, then situate the power panel in an optimal location to catch the sunduring the day. Once the sun goes down, the lights automatically illuminate andstay on for hours.
Solar string lights come intrendy Edison-style bulbs, rope lights, and fairy lights. Many come in a widerange of color and length choices as well, to personalize your space even more.
InSummary
String lights glowing at nightcreate a magical feeling that increases the enjoyment of your backyard space.
I hope this article gives you the perfect solution to hang string lights in your backyard without trees.
When you use the tips above, you can light up your yard (or any other area on your property) for BBQs and special events. Or choose to make them a permanent feature year-round.
Don’t let a treeless backyard stop you from designing the perfect way to hang string lights. Now you, too, can increase the beauty and safety of your outdoor space!
