EN 733 Standardised Pumps
Centrifugal pump standardised to EN733 in AISI 304 stainless steel AISI 304 (3 SERIES), AISI 316 stainless steel (3L SERIES), with 2 or 4 poles motor and with Back pull-out.Read more
Features
Sturdy construction
Volute obtained with hydro-forming process
High performances
Centrifugal pump EN733 compliant and available in different materials:
• Stainless steel AISI 304 (3 SERIES)
• Stainless steel AISI 316 (3L SERIES)
• Stainless steel AISI 316 micro-cast for some models (3L SERIES)
EBARA Pumps Europe perfectly understands the different needs of the sectors where the pumps will be used. This is why it has created the 3 SERIES with 2 or 4 poles motors; a complete, innovative, reliable and efficient series to operate successfully even in the most difficult and heavy-duty conditions.
The distinguishing feature of 3 SERIES is the back pull-out design: a conformation that allows the removal of the impeller-motor block without disconnecting the pump body from the piping, thus allowing any type of maintenance.
The range consists of the:
• Monobloc 3(L)M SERIES
• With rigid coupling 3(L)S SERIES
• With elastic coupling 3(L)P SERIES
For the 3LM SERIES and 3LS SERIES the Z version is available, with the casing body without the support foot and with a new foot directly mounted to the motor bracket.
This solution allows the pump to stay in limited spaces where it is not possible to connect the foot of the standard 3 SERIES and, most importantly, allows to connect the pump in different positions thanks to the 90° rotation of the foot.
The 3(L)S SERIES and 3(L)P SERIES are available with ATEX certified hydraulics and motor (we suggest contacting the sales network for the ATEX version).
For further technical information see the Databook
• Heating, ventilation and air-conditioning systems
• Water supply for civil, agricultural and industrial plants
• Pressurisation
• Firefighting systems
• Industrial liquid handling systems
• Irrigation
• Cooling towers
• Swimming pools
• Drainage
• Washing systems
Technical data
Flow rate | up to 240 m³/h |
Total head | up to 100 m |
Max. working pressure | 10 bar |
Max. temperature of the liquid | -10°C ÷ +75°C for H, HS, HW, HSW versions -10°C ÷ +90°C for standard models -20°C ÷ +90°C for E version |
MEI | > 0.4 |
Poles | 2 and 4 |
Insulation class | F |
Protection degree | IP55 |
Voltage | Single-phase 1~230V ±10% Three-phase 3~230/400V ±10% (up to and including 4kW) Three-phase 3~400/690V ±10% (from 5.5kW and above) |
Materials
Pump body | Stainless steel AISI 304 (EN 1.4301) for SERIE 3 Stainless steel AISI 316L (EN 1.4404) for SERIE 3L Stainless steel AISI 316 (EN 1.4401) precision-cast for SERIES 3L 65-250 80-160/200/250 |
Impeller | Stainless steel AISI 304 (EN 1.4301) for SERIE 3 AISI 316L (EN 1.4404) for 3L SERIES 32, 40, 50 AISI 316 (EN 1.4401) precision-cast for 3L SERIES 65, 80 |
Shaft | Stainless steel AISI 304 (EN 1.4301) for 3 SERIES Stainless steel AISI 316L (EN 1.4404) for 3L SERIES Duplex for 3L SERIES 65-250, 80-200/30, 80-200/37, 80-250 |
Mechanical seal | Standard = Ceramic/Carbon/NBR H = Graphite/Ceramic/FPM HS = Silicon Carbide/Silicon Carbide/FPM HW = Tungsten Carbide/Tungsten Carbide/FPM HSW = Silicon Carbide/Tungsten Carbide/FPM E = Graphite/Ceramic/EPDM |
Motor support | Aluminium - cast iron |
Commercial documentation
- EN733 Standardised Catalogue 50Hz
- EN733 Standardised Catalogue 60Hz
Technical documentation
- Data Book SERIE 3 50Hz 2 poles
- Data Book SERIE 3 50Hz 4 poles
- Data Book SERIE 3 60Hz 2 poles
- Data Book SERIE 3 F 50Hz 2 poles
- Data Book SERIE 3 F 50Hz 4 poles
- Generic instruction manual
- 3-3D-MD SERIES instruction manual
- 3SF-3LSF-3PF-3LPF ATEX instruction manual
- Data Book ATEX
3D drawings
- 3M SERIES 2 poles 50Hz
- 3M SERIES 4 poles 50Hz
- 3M SERIES 2 poles 60Hz
- 3S SERIES 2 poles 50Hz
- 3S SERIES 4 poles 50Hz
- 3S SERIES 2 poles 60Hz
- 3P SERIES 2 poles 50Hz
- 3S ATEX 50Hz
- 3LP SERIES 2 poles 50Hz
- 3PF SERIES 50Hz
- 3LPF SERIES 50Hz
ICIM
Download
PZH
Download
3(L) SERIES ATEX
Download
3ME WRAS
Download
What is the maximum fluid viscosity that 3 SERIES and 3D SERIES can handle?
Contact EBARA’s Technical Customer Service to check if the pump’s model is suitable for the solution’s physical properties (concentration and temperature). In order to meet the operating requirements according to the liquid’s specific characteristics, the pump’s motor and/or hydraulics may need to be modified.
What is the difference between 3 SERIES and 3D SERIES?
The difference between the two versions stands in the material they are made of, AISI 304 or AISI 316L stainless steel for 3 SERIES, cast iron for 3D SERIES.
Can a 3 SERIES or 3D SERIES pump be fitted vertically?
Yes, but only under specific operating conditions. Ask our Technical Customer Service for advice.
More details
Do you need more information about this product? Send us your request.
Contact us
* Required
YOU MIGHT ALSO BE INTERESTED IN:
- GS Catalogue
- EN733 Standardised Catalogue 50Hz
- EN733 Standardised Catalogue 60Hz
See more downloads
- EN733 Standardised Catalogue 50Hz
- EN733 Standardised Catalogue 60Hz
- Data Book SERIE 3D 50Hz 2 poles
See more downloads
- EN733 Standardised Catalogue 50Hz
- EN733 Standardised Catalogue 60Hz
- Data Book MD 50Hz 2 poles
See more downloads
- GSD Series Catalogue
- Data Book GSD Series 50Hz
- GSD Series instruction manual